MILLERMATIC 252 200(208)/230V 60HZ 1PH 907321. UPC: 715959356404
Shipped usually in 1-3 business weeks.
The Miller Millermatic 252 MIG welder 907321 is a 250 amp, all-in-one MIG welding package that allows you to weld longer on high end applications.
The Miller Millermatic 252 MIG welder 907321 provides the highest output in its class (250 A at 28 VDC). Is capable of welding material from 22 gauge to 1/2 in thick in a single pass.
This is a 250 amp, all-in-one MIG welding package that allows you to weld longer on high end applications.
The Miller Millermatic 252 MIG welder have been designed for increase performance. The function Active Arc Stabilizer provides the most consistent arc starts in its class along with optimum weld performance in all settings.
Auto-Gun-Detect, Miller’s exclusive function makes easy to start welding using either gun, by simply pulling the trigger. Automatically detects and recalls the voltage, wire feed speed and timer of the active gun. Welding aluminium is even easy using the direct hookup of the optional Spoolmatic 30A.
Since XR-type guns can be directly connected to the Millermatic 252 you can use 12 inch rolls of wire instead of the more expensive 1 lb rolls with the spoolgun.
A new and large digital front panel with digital timer allows the operator to control a preset a wire feed speed and voltage. The settings includes standard run-in, pre/post flow, burnback, spot/delay (switch) timer menu, etc.
Line voltage compensation function keeps power constant even when power input varies by (+ OR -)10 percent.
Preventing work place injuries and improve maneuverability is possible due a low cylinder rack, installed to hold your gas cylinders.
- Flux Cored (FCAW)
- MIG (GMAW)
Main Features of the Miller Millermatic 252 MIG Welder 907321
Highest Output in its Class!
(250 A at 28 VDC). Weld longer on high-end applications.
Large, Digital Front Panel with Built-in Digital Timers Menu
Enables operator to preset voltage and wire feed speed. Standard run-in, pre/postflow, burnback, spot/delay (stitch) timer menu.
Auto Gun Detect
Miller’s Auto Gun Detect allows operator to simply pull trigger on MIG gun, spool gun or push/pull gun. Automatically detects and recalls the voltage, wire feed speed and timer of the active gun.
Push-Pull Gun Direct Connect
Compatible with Spoolmate 200 Series spool gun with wire feed speed control on the gun. This saves time by reducing trips back to the machine. Also compatible with more industrial Spoolmatic 15A or 30A spool gun.
Angled, Dual-Gear Driven, Cast Aluminum Drive System
Features no-tool, quick-change reversible drive rolls and an easy-to-set, scaled tension knob.
EZ-Change Low Cylinder Rack
Allows operators to easily roll cylinders on and off of rack – no need to lift cylinders.
EZ-Access Consumable Compartment and Parameter Chart
Set weld parameters right the first time with convenient new flip-down compartment that provides fast access to parameter chart and consumables.
Larger Work Area
Now with longer 15-ft M-25 gun.
- Metal Fabrication
- Home Hobbyist
- Maintenance and Repair
- Farm and Ranch
- Light Industrial Applications
- Metal Art
In the box
- Miller Millermatic 252 MIG Welder 200/(208)/230 V
- 10 ft (3 m) power cord and plug
- 15 ft (4.6 m), 250 amp M-25 MIG gun for .030/.035 in wire
- 10 ft (3 m) work cable and clamp
- Argon mix regulator/flow gauge and hose
- Extra contact tips
- Factory-installed running gear with EZ-Change Single Low Cylinder Rack
- .030/.035 in reversible drive rolls
Weldable Metals Steel
- Stainless Steel
- Input Voltage 208 V – 220/230/240 V
- Input Phase 1-Phase
- Input Hz 60 Hz
- Current Type DC
- Rated Output 200 Amps at 28 VDC, 60% duty cycle,250 Amps at 28 VDC, 40% duty cycle
- Max Open Circuit Voltage 38 VDC
- Amperage Range 30 A – 300 A
- Wire Feed Speed 1.3 m/min – 17.8 m/min
- 50 IPM – 700 IPM
- Wire Diameter Solid Steel 0.023 in 0.045 in
- Solid Steel 0.6 mm 1.2 mm
- Stainless 0.023 in 0.045 in
- Stainless 0.6 mm 1.2 mm
- Flux Cored 0.03 in 0.045 in
- Flux Cored 0.8 mm 1.2 mm
- Spool Size 12 in (305 mm)
- Warranty 3 Years
- Miller’s True Blue Warranty
- Portability Running Gear / Cart (Standard)
- Weld Output CV
- Net Width 19 in
- Net Height 30 in
- Net Length 40 in
- Net Weight 205 lbs
Download here the spec sheet for Millermatic 252 MIG Welder 907321.