MILLERMATIC 255 208/240V 50/60HZ 1PH 907734

MILLERMATIC 255 208/240V 50/60HZ 1PH 907734. UPC: 715959668873

Shipped usually in 1-3 business weeks.

The Millermatic 255 907734 is a easy to use machine to increase efficiency and productivity for the light manufacturing and fabrication users.

Color screen featuring Auto-Set Elite and Pulsed MIG. This all-in-one welder connects to 208 or 240 volt input power.

Welds up to 1/2” aluminum, stainless and mild steel.

Main Features of the MILLERMATIC 255 907734

Easy-to-understand interface

7-inch color LCD display ensures proper machine setup and parameter selection, reducing setup time and increasing weld time.

Pulsed MIG welding delivers higher quality

Lower heat input for less distortion on thin materials, less spatter minimizes post weld grinding and rework allowing more welding time.

Perform welding applications that couldn’t be done in the past.

Auto-Set Elite

Offers predefined weld settings to increase ease of use and ensure that the job is done right for operators of all skill levels.

Program mode allows easy save and recall of favorite weld settings.

Deliver more productivity, consistent quality by welders of all skill levels by using pre-qualified weld settings. Minimize supervisor need to intervene.

Auto-Line Technology

For portability and reliability this inverter power supply allows for any single-phase input voltage hookup (208–240 V) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable power.

Versatility

Capabilities include MIG, pulsed MIG and flux-cored welding.

MDX-250 MIG Gun w/ AccuLock S consumables

AccuLock liner loads from the front and locks at the front and back to insure proper alignment for flawless wire feed path.

New rubber overmold and ball -and-socket handle design improves grip and reduces welder fatigue.

New Industrial Bernard AccuLock S contact tips provide superior Spray and Pulsed MIG arc performance.

Portability

Machine only weighs 84 lb. Weight is reduced by more than 50 percent compared to the Millermatic 252.

Optional EZ-Latch running gear

Operators no longer need to use lift truck to load machine and running gear into the truck. Latches secure machine to running gear.

Simply loosen the latch retaining knob and rotate latches to disengage machine from running gear for easy portability.

What is included

• Power source with 10 ft. (3 m) power cord
• 15 ft. (4.5 m) 250-amp MDX-250 MIG gun w/ Bernard AccuLock S consumables for .035/.045 in. (0.9/1.2 mm) wire 10 ft. (3 m) work cable and clamp and 50mm Dinse-style connector
• Flow gauge regulator and gas hose for argon or AR/CO2 mix
• Extra Contact tips .035/.045 in. (0.9/1.2 mm) reversible drive rolls
• Material Thickness Gauge

What is not included

• Shielding gas (for welding with solid wire [GMAW])}
• Welding wire
• Push-Pull Gun (for welding aluminum)
• Spool Gun (for welding aluminum)
• Flux cored drive rolls (for welding with flux cored wire [FCAW])
• Personal safety products (helmet, gloves)

Weldable Metals

• Steel
• Stainless Steel
• Aluminum

Material Thickness

• Mild Steel 24 ga. (.51 mm) – 1/2 (13 mm)
• Aluminum 18 ga. (1.02 mm) – 1/2 (13 mm)

General Specifications of the MILLERMATIC 255 907734

• Input Voltage 208 V 220/230/240 V
• Input Phase 1-Phase
• Input Hz 50 / 60 Hz
• Input Amperage 31.4
• Current Type DC
• Rated Output 230 A at 25.5 V, 60% duty cycle
• Max Open Circuit Voltage 87 VDC
• Amperage Range 20 A – 350 A
• Wire Feed Speed 50 IPM – 800 IPM
• Wire Diameter Aluminum 0.035 in 0.047 in
• Flux Cored 0.03 in 0.045 in
• Stainless 0.023 in 0.045 in
• Solid Steel 0.023 in 0.045 in
• Spool Size 12 in (305 mm)
• Weld Output CV
• Warranty 3 Years Miller’s True Blue Warranty

Shipping Dimensions

• Net Width 13.75 in
• Net Height 19.25 in
• Net Length 26.25 in
• Net Weight 84 lbs

Spec Sheet

Download here the spec sheet for MILLERMATIC 255 907734.