Every component in a Miller industrial engine drive is engineered and built to assure ultimate reliability in the most punishing conditions. What makes Miller Industrial Engine Drives so Tough?

Maintenance displays:
• Engine hours
• Hours left before an oil change is due
• Fuel gauge & low fuel shutdown indicator
• High coolant temperature and low oil pressure shutdown indicators

Deutz turbocharged four-cylinder diesel engine provides ample power at high altitudes.

Ingersoll-Rand ultra-reliable industrial rotary screw air compressor. Belt-driven with automatic belt tensioner with a life expectancy of 30,000 hours.

The Vault-ultimate control board reliability. Hardened solid-state control technology, housed in a sealed vault. The vault's sealed connections are made through watertight plugs that make these components impenetrable to dust and moisture.

Independent compressor controls include an on/off switch for applications not requiring compressed air. At idle speed, the Air Pak will produce 100 PSI at 60 CFM.

Quiet - at only 70 db (95 Lwa) when idle, 79 db (104 Lwa) at maximum output. Improves work site communications.

Hot Start™ provides positive stick electrode starts to make it easy to start all types of electrodes.

Arc-Drive makes welding easy. Automatically enhances Stick welding, especially on pipe, by focusing the arc and preventing the electrode from going out.

Optional AC/DC/battery charge/jump-start for AC TIG welding and 12 or 24 volt batteries. Simply select the battery voltage and connect cables to the separate battery output studs. Note: High-frequency control required for AC TIG welding.

Meets NEMA and IEC output ratings.

Process

Applications